Installation manual

OperatingthePVinverter

NOTE

FRT is only accessible if you have selected Germany MVD, Italy CEI 021 or

Italy A70 as your grid selection.

6.3.6.1 GeneralSettings

Settings in the General Settings include Language, Date, Time, Screen Saver, Brightness, Con-

trast, Baud Rate, CO2 saved, Earning Value, and Currency.

Figure 6.13.: General Settings Page

User can set the Language, Date, Time, Screen Saver, LCD Brightness, and Contrast appear on

the General Settings page 1. Screen Saver can be adjusted from 5 minutes to 60 minutes. When

over the setting time limitation, without the pressing of any buttons, the LCD backlight will go off

automatically. Brightness and contrast can be adjusted from 1-5 levels (low to high). On General

Settings page 2 the Baud Rate, CO2 Saved, Earning Value and Currency are adjustable. Cur-

rency is selectable as Australian Dollar (AUD), Euro (EUR) and Great Britian Pound (GBP).

6.3.6.2 InstallSettings

Correct passwords are requested when entering Install Settings. Install Settings for user and

installation technicians are different. The password can not be revised. After con rmation of the

installer password (5555), user can set Inverter ID and Insulation settings. Country is viewable but

not adjustable.