Installation manual

ENGLISH

Installation

NOTE

The fans shown are without the required protective screen for illustrative

purposes

The upper section of the inverter, shown in the darker tone above, is sealed from the lower section

and rated at IP65 enclosure protection. The lower section of the inverter, containing the cooling

mechanisms, is rated at IP55 enclosure protection.

4.2 Mounting

This unit utilizes a wall mounting system. Please ensure the installation is perpendicular and

with the AC plug at the bottom. Do not install the device on a slanted wall. The dimensions of the

mounting bracket are shown in the following gures. There are 12 pcs. of M6 screws required for

attaching the mounting plate to the wall. Attach the mounting plate securely to the wall, before

attaching the inverter on the mounting plate.

NOTE

Please ensure you are using the correct fastener for the material you are

attaching the inverter mounting plate to.