Installation Notice
Table Of Contents
- Symbols Used 5
- General Safety Information 6
- Qumi Z1H Installation Notice 6
- Power Supply Safety 7
- Cleaning Qumi 7
- Control Warning 7
- FCC Warning 8
- Canada 8
- Safety Certifications 8
- Disposal and Recycling 8
- About this Manual 9
- Qumi Z1H Main Features 9
- Front-Left View 11
- Rear View 11
- Top View 12
- Bottom View 13
- Remote Control Keypad 14
- Activating the Remote Control Battery 15
- Replacing the Remote Control Battery 15
- Powering On/Off the Projector 17
- Connecting to a Wi-Fi Network 20
- Adjusting the Focus 23
- Playing Media Files from a Storage Device (USB Flash Drive, microSD Card) 24
- Screencasting with a Mobile Device 28
- Playing from a Video Source (HDMI) 29
- Playing from a Video Source (Type-C / DisplayPort) 30
- Viewing Documents from a Storage Device (USB Flash Drive, microSD Card) 31
- Using the Bluetooth® Speaker 33
- Connecting the Projector to Bluetooth Devices 35
- Customizing the App Shortcuts on the Home Screen 38
- Customizing the Category Menus 39
- The Projector Settings Menu 40
- The System Settings Menu 42
- Tips 46
- System Reset Method (Reboot) 46
- Image Problems 47
- Remote Control Problems 47
- Audio Problems 47
- FAQs 48
- Vivitek Support Site 49
- Projection Distance vs Projection Size 50
- Timing Mode Table 51
- Specifications 52
- Important Safety Information
- Regulatory Compliance
- Introduction
- Package Contents
- Your Projector
- Remote Control
- Powering/Charging the Projector
- Making Connections
- Using the Projector
- Bluetooth® Connections
- The Home Screen
- Using the Settings Menus
- Troubleshooting/FAQ
- Additional Information
- 28 -
Screencasting with a Mobile Device
1. Power on the projector. Refer to the Powering On/Off the Projector section on
page 17.
2. Connect the projector to a Wi-Fi network. Refer to the Connecting to a Wi-Fi
Network section on page 20.
3. Connect your mobile device to the same Wi-Fi network as the projector.
4. For iOS devices open the AirPlay menu on your mobile device.
For Android devices open the Screencasting menu on your mobile device.
5. Select the projector from the AirPlay/Screencasting menu on your mobile device.
Your mobile device’s screen will be displayed on the projector.
NOTE:
Screencasting only works on the iOS devices with AirPlay capabilities, and Android
devices with Google Cast capabilities.
NOTE:
In situations where a normal Wi-Fi network is not available (for instance in an
outdoors setting) you may use Wi-Fi hotspots to connect devices to your projector
wirelessly for screencasting purposes:
For iOS devices activate the device’s Wi-Fi hotspot, connect the projector to the
device’s hotspot via the steps in the Connecting to a Wi-Fi Network section on
page 20.
For Android devices activate your projector’s Wi-Fi hotspot via the
Connectivity > Wi-Fi > Portable hotspot menu and then connect the Android
device to the projector’s Wi-Fi signal.