Installation Notice
Table Of Contents
- Symbols Used 5
- General Safety Information 6
- Qumi Z1H Installation Notice 6
- Power Supply Safety 7
- Cleaning Qumi 7
- Control Warning 7
- FCC Warning 8
- Canada 8
- Safety Certifications 8
- Disposal and Recycling 8
- About this Manual 9
- Qumi Z1H Main Features 9
- Front-Left View 11
- Rear View 11
- Top View 12
- Bottom View 13
- Remote Control Keypad 14
- Activating the Remote Control Battery 15
- Replacing the Remote Control Battery 15
- Powering On/Off the Projector 17
- Connecting to a Wi-Fi Network 20
- Adjusting the Focus 23
- Playing Media Files from a Storage Device (USB Flash Drive, microSD Card) 24
- Screencasting with a Mobile Device 28
- Playing from a Video Source (HDMI) 29
- Playing from a Video Source (Type-C / DisplayPort) 30
- Viewing Documents from a Storage Device (USB Flash Drive, microSD Card) 31
- Using the Bluetooth® Speaker 33
- Connecting the Projector to Bluetooth Devices 35
- Customizing the App Shortcuts on the Home Screen 38
- Customizing the Category Menus 39
- The Projector Settings Menu 40
- The System Settings Menu 42
- Tips 46
- System Reset Method (Reboot) 46
- Image Problems 47
- Remote Control Problems 47
- Audio Problems 47
- FAQs 48
- Vivitek Support Site 49
- Projection Distance vs Projection Size 50
- Timing Mode Table 51
- Specifications 52
- Important Safety Information
- Regulatory Compliance
- Introduction
- Package Contents
- Your Projector
- Remote Control
- Powering/Charging the Projector
- Making Connections
- Using the Projector
- Bluetooth® Connections
- The Home Screen
- Using the Settings Menus
- Troubleshooting/FAQ
- Additional Information
To supply power to the
- 16 -
POWERING/CHARGING THE
PROJECTOR
Z1H:
1. Connect the power cable to a power socket
2. Connect the power cable to the supplied adapter.
3. Connect the adapter cable to the DC In port on the projector.
4. Once the adapter and power cable are connected to the projector, the LED status
indicator on the top of the projector will illuminate indicating the charge status (refer
to Top View on page 12 for more information on LED behavior).
The charging status will also be indicated on the home screen.