Specifications

DELTA ELECTRONICS, INC. Nov., 2021
DOCUMENT : DELVW-215-001
(Preliminary specification)
REVISION : A3
PAGE : 3 OF 6
 VWPSC10C-15AM9P Specification
Input Specifications
Parameter SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Operating Voltage VIN Measured position: input connector 9 13.5 16 V
Transient Voltage Excursions MAX
VIN
MAX
The voltage may deviate VIN MAX
+2.5VDC for up one (1) second due
to load events
18.5
V
Transient Voltage Excursions MIN
VIN
MIN
The voltage may deviate VIN MIN
-1.5VDC for up one (1) second due
to load events
7.5 V
Standby Power Psb VIN= 13.5V 1 W
Input Operating current Icc VIN= 9V 3 A
Output Specifications
Parameter SYMBOL CONDITIONS MIN TYP MAX UNITS
Recommend Charging Distance Range D
VIN = 13.5V, from WCM interface
surface to Rx coil surface, Rx is on
the center of Tx coil
0 3 mm
The Number of Devices Qty
The device are charged at the same
time
1 Pcs
Support Max Power for Rx Pout VIN = 13.5V, Rx output power 15 W
Protection
Parameter SYMBOL CONDITIONS MIN
TYP MAX UNITS
VIN UVP Threshold Vuv
Pout = 0W
shut down, auto recovery
7 7.5 8 V
VIN UVP Recovery Vuv R
Pout = 0W
Recovery voltage from UVP
8 8.5 9 V
VIN OVP Threshold Vov
Pout = 0W
shut down, auto recovery
18 18.5 19 V
VIN OVP Recovery Vov R
Pout = 0W
Recovery voltage from OVP
16.5 17 17.5 V
UVP and OVP Delay Delay

1.5 2.0 2.5 s
FOD Detection FOD Meet Qi spec
Issued