User Manual

ManualsBrandsDelta Electronics ManualsAudio EquipmentBluetooth Speaker

VFRU-25-26BT 使用說明

A. Turn on

 Plug the included USB cable into the DC IN jack on the side of the speaker

Plug the other end of the USB charging cable into 5VDC power source, the

power up tone sounds and the button starts blinking

 Press the button on the top of the speaker, the button starts

blinking

B. BT Play Music

Step1: Pairing mode

Make sure the button is blinking rapidly in the pairing mode.

Step2: Pair + Connect

1. Enable Bluetooth on your smartphone or other device and choose

Summary of content (4 pages)

PAGE 1
VFRU-25-26BT 使用說明 A. Turn on  Plug the included USB cable into the DC IN jack on the side of the speaker Plug the other end of the USB charging cable into 5VDC power source, the power up tone sounds and the  Press the button starts blinking button on the top of the speaker, the button starts blinking B. BT Play Music Step1: Pairing mode Make sure the button is blinking rapidly in the pairing mode. Step2: Pair + Connect 1.
PAGE 2
DeltaBreez SIG from the pairing options on your smartphone. 2. The speaker gives an audio signal when it’s finished pairing and connecting to your smartphone. The button turns solid blue 3. To give one press to the button be Pause and press button again be Play. Step3: Disconnect If disable Bluetooth on your smartphone or other device, the button is blinking. If you want to pair to a new device, give a short double-press to the button. The speaker gives a signal and the button starts blinking. C.
PAGE 3
Step2: Aux in input The speaker automatically switches to the AUX IN audio, and the button turns white. D. Reconnect If you’ve previously paired your phone or other Bluetooth device with this speker, the speaker will automatically attempt to reconnect to that device when you switch the speaker on. Unplug the cable from the speaker’s AUX IN jack. The speaker will try to reconnect to the last Bluetooth device. E: Turn off Press and hold the button.
PAGE 4
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.