User manual

Chapter 3 Examples
3-4
Step 5. To click in the right side of button type and you can choose Button type.
Step 6. To click besides “Write” and the window of “Device reference” will be shown as
following. Here we set Y1 to control ON/OFF of Y1. That is very important to set the
communication address. If the communication address of the first PLC is 1 and
then set it to 1, the communication address of the second PLC is 2 then set it to 2.
Each PLC has its communication address independently.
Step 7. If you check the item of “Read” and press
besides “Read”, it will also have the
window of device reference. You can set the device name, number and
communication address that you want to read and then press “OK” to return to the
window.
Step 8. If you check the item of “Function key” and press besides “Function key”, you
will get the pop-up menu. You can set it by yourself to control button components.
Step 9. You can set password to protect this component.
Step 10. Button text is to set the text on the button. The font size is usually 8X12 and is also
clear to display. You can also put the figure on the button.
Step 11. To press “OK” after finishing setting and this button will be used for the setting
functions.
Step 12. Choose “Compile” > “Compile” to compile the edition page.
Step 13. In TP04G, choose “1. download program TP04G PC” to download and it will