User manual

Chapter 1 TPEdit Operation
1-6
, the object center horizontally , right , top , the object center
vertically or bottom. (you can move the text in the object by pushing button
and move the figure in the object by pushing button )
■ Geometric Toolbar: it provides an easy drawing system in display plan for user to
edit TP display directly.
■ Location Toolbar
1. Tools at the left set ( , , and ): they are used to adjust the
location of the object.
2. Tools at the right set ( , , and ): they are used to align multiple
objects to top, bottom, left and right. (these tools are enabled only when two or
more objects are selected)
■ Working Area: it is the area for editing. That is also the display that will show on TP
screen.
■ Status Bar: it is used to display the desired object name and geometric coordinate.
The start-up display of TPEdit will be shown as follows. There are four functions in
menu bar for you to select(File, Communication, Tools and Help).
After opening file, you should set Device Type setting, including PLC or Inverter Drives
type…, TP Type and File Name. At the moment, you can select other functions in
menu bar. We will introduce them later.