User manual

Chapter 1 TPEdit Operation
1-60
Choose Tools (T) > TP Object Communication Default Setting to get the following
dialog box. Set the communication port and station number for all objects in TP to
communicate..
■ Change Device Type
Choose Tools (T) > Change Device Type to get the following dialog box. It can change
connected device type. For example, before changing PLC to SIEMENS S7-200 series,
it needs to modify bit/value device one by one.
■ User-Level/Password Setting
Choose Tools (T) > User-Level/Password Setting to get the following dialog box. If
there is User Level setting, TP will execute password function according to
User-Level/Password Setting. The higher user level and higher priority and it needs the
same level or higher priority to operate.