User manual

Chapter 1 TPEdit Operation
1-59
■ Communication Setting
Choose Tools (T) > Communication Setting to get the following dialog box. You could
set 0~255 to TP Station Address. It can transmit data to TP. You could set COM1 ~
COM8 for PC COM Ports. You could set 9600~115200 bps for Baud Rate. These
settings should be set to the same as TP04, otherwise it can’t transmit between TP and
PLC.
■ TP Protocol Setting
Choose Tools (T) > TP Protocol Setting to get the following dialog box. You could set
COM1 (RS-232) Data Format and COM2(RS-422/RS-485) Data Format. These
settings can transmit between TP and PLC.
■ TP Object Communication Default Setting