User manual

Chapter 1 TPEdit Operation
1-47
Step 2. User designates D0 device and TP will use D0 content to be sampling points
and 100 points max. Odd numbers will be a sets(D1, D3…) and even numbers
will be the other sets (D2, D4…). User can use these two sets to draw two
curves.
Step 3. Choose View (V) > Object Inspector: display all properties of objects and it also
can be edited and set directly.
■ X-Y Curve
TP reads a serial figure from PLC corresponding registers to convert to XY chart to
display on TP screen.
Step 1. Choose Object (O) > X-Y Curve or click the button directly and you will get
the following dialog box.
Step 2. User designates D0 device and TP will use D0 content to be sampling points
and 100 points max. The first point of corresponding XY can be composed of
D1 and D2, the second point of corresponding XY can be composed of D3 and
D4, and in this way, a XY chart can be drawn.
Step 3. Choose View (V) > Object Inspector: display all properties of objects and it also
can be edited and set directly.
■ Geometric Figure
You could press the buttons to use geometric
directly and press the buttons to draw the line. The following page is the
result that did with these tools.