User manual

Chapter 1 TPEdit Operation
1-46
Step 2. You could set the Metrology type and Unit Name you need.
Step 3. Choose View (V) > Object Inspector: display all properties of objects and it also
can be edited and set directly.
■ Numeric Input
You can use function key or instruction key to input figures. TP will transmit figures to
the corresponding registers of PLC when pressing Enter.
Step 1. Choose Object (O) > Numeric Input or click the button directly and you will
get the following dialog box. The settings of reference device, Value Set, Limit
Set, Outline Set, Call Set, User Level are the same as the Button Value
Setting.
Step 2. Choose View (V
) > Object Inspector: display all properties of objects and it also
can be edited and set directly.
■ Curve
TP reads a serial figure from PLC corresponding registers to convert to curve to display
on TP screen.
Step 1. Choose Object (O) > Curve or click the button directly and you will get the
following dialog box.