User manual

Chapter 1 TPEdit Operation
1-45
Step 3. You can set time relative, font, frame set and Location set in the dialog box.
Step 4. TP will read the value of time and date of REAL TIME CLOCK and display on
TP screen directly.
Step 5. You could select time of TP or time of PLC. Time of TP means the time you
write into reference device and time of PLC means the time read the PLC time
from register data.
■ Multi-state Bitmap
Step 1. Choose Object (O) > Lamp Display or click the button to get the following
dialog box. The settings are the same as dynamic figure. The addition setting
is text input. It is used to input text and edit text. screen.
Step 2. Choose View (V) > Object Inspector: display all properties of objects and it also
can be edited and set directly.
■ Units
Step 1. Choose Object (O) > Units or click the button directly and you will get the
following dialog box.