User manual

Chapter 1 TPEdit Operation
1-39
Step 6. “Refer Value” can be used to calculate state range.
■ Button
TPEdit provides a series of button for user to use in every kind of occasion. That will
save much time in designing PLC program. Choose Object (O) > Button or click the
button to get the following dialog box. The following is the introduction for the
buttons. The function of button includes user level and used with Tools (T) >
User-Level/Password Setting. Choose View (V) > Object Inspector: display all
properties of objects and it also can be edited and set directly.
ON/OFF button: press this button and TP will send the contact signal to the PLC
corresponding contact ON or OFF. There are 6 types of ON/OFF
buttons.
 Set ON : Once you press this button and it will be always On.