User manual

Chapter 1 TPEdit Operation
1-37
Step 2. You could set reference device, value type, value length, direct set, max., and
min value in the dialog box.
Step 3. direct set is used to set the direction for Progress Bar to increase and show on
the TP screen.
Step 4. Max. value and min. value are the range for value to display. Only the value
between max. and min. value will be shown on the bar chart.
Step 5. After setting, TP will read PLC corresponding register data and convert it to
Progress Bar to show on TP screen.
Step 6. Choose View (V) > Object Inspector: display all properties of objects and it also
can be edited and set directly.
■ Meter
Step 1. Choose Object (O) > Meter >circle meter or click the button to get the
following dialog box.
Step 2. You could set reference device, value type, integer number, decimal number,
max. value, min. value, style, font, main scale and sub scale.
Step 3. The style could be 300 or 360 degrees. It means a circle is 300 or 360 degrees.
Step 4. After setting, TP will read the PLC corresponding register data and convert it to
circle meter to show on TP screen.
Step 5. Choose View (V) > Object Inspector: display all properties of objects and it also
can be edited and set directly.