User manual

Chapter 1 TPEdit Operation
1-35
will show the corresponding bitmap. For example, if current state 0 and range
value is 100, current state 1 and range value is 300, when device value is
between 100, 300 and it will show the corresponding bitmap of current state 0,
if device value is large than 300, and it will show the corresponding bitmap of
current state 1. But if device value is small than 100, it won’t display any bitmap
due to no current state conforms to it.
Step 4. Choose View (V) > Object Inspector: display all properties of objects and it also
can be edited and set directly.
Step 5. it is used to set the arrangement order of the state of the corresponding device
(from max to min or from min to max)
Step 6. Double click the input cell of device value >=Range value to get the pop-up
dialog of all state table for user to set.
Step 7. “Refer Value” can be used to calculate state range.
■ Scale
Step 1. Choose Object (O) > Scale or click the button to get the following dialog.