User manual

Chapter 1 TPEdit Operation
1-10
■ Read Out: TP reads PLC corresponding value of register to show on TP screen.
■ Indicator (16x16): There are two types 1.Indicator: read the corresponding contacts
(ON or OFF). 2. Multi-state Indicator: reads the register data to show the
corresponding indicator on TP screen.
■ Bitmap: it is used to edit static bitmap to be the background. Or it also could be
used for TP to read the corresponding contacts (ON or OFF) or register data to
show the corresponding dynamic bitmap on TP screen.
■ Scale: edit the scale that user needs to TP screen.
■ Progress Bar: TP reads the PLC corresponding data of register to convert to
progress bar to show on TP screen.
■ Meter: TP reads PLC corresponding data of register to convert to circle meter to
show on TP screen.
■ Message Display: TP reads PLC corresponding contacts (ON or OFF) or register
data to display the corresponding message on TP screen.
■ Button: it will have a series of button type for you to choose. It will be easier to
design PLC program.
■ Clock Display: TP reads time/week/date from internal RTC or PLC series to display
on TP screen.
■ Multi-state Bitmap: TP reads the corresponding contacts (ON or OFF) or register
data to show the corresponding user-defined figure or characters on TP screen.
■ Units: edit the unit that user needs on TP screen.
■ Numeric Input: you can use function key or instruction key to input figures. TP will
transmit figures to the corresponding registers of PLC when pressing Enter.
■ Curve: TP reads a serial figure from PLC corresponding registers to convert to
curve and display on TP screen.
■ X-Y Curve: TP reads a serial figure from PLC corresponding registers to convert to
XY chart and display on TP screen.
■ Geometric Graphic: it is used to edit TP display.
View (V):
■ Page Manager: manage the edited page.
■ TP Page: display edited TP page and switch between TP page and start-up display.