System information

Chapter 2 TP04G Operation and Settings

2-1

Chapter 2 TP04G Operation and Settings

This chapter will introduce the two working modes of the TP04G:

System main menu mode: users can change the settings of the HMI using five

main menus. This chapter will discuss the content and function of each menu,

and teach you how to use the TP04G.

Display monitor mode: this will display on screen status of devices connected to

the TP04G (ex: PLC, AC drives or other hardware devices). User can use the

TPEdit software to create the type of monitoring needed of each external piece of

hardware.

2-1 System Main Menu

When TP04G is powered on, it will display “Delta” and then “TP04G”. User may enter the

system main menu by pressing and holding the “Esc” key on the front panel at the same

time the TP04G is displayed. Continue to hold until the System Menu appears.

There are five selections in the System Main Menu as shown below:

1. Download TP04G <-- PC

2. Upload TP04G --> PC

3. Copy TP04G <--> PC

4. TP04G Settings

5. Execute

You can choose any of the options by pressing the “Up” or “Down” key on the front panel

and then pressing the “Enter” key. If an error is made, you may press the “Esc” key to

exit and return to the System Main Menu screen.

2-2 Operation

2-2-1 Download TP04G <--PC

Allows the user to download a program from a PC to the TP04G. After choosing

option 1, the TP04G will wait for the PC (TPEdit software) to send data. As the

data is being received the TP04G will display a receive status on the screen.

Once all the data is received, you may return to the System Main Menu by

pressing the “Esc” key.

Below is a pictorial description of the process.

1. Download TP04G <-- PC

2. Upload TP04G --> PC

3. Copy TP04G <--> PC

4. TP04G Settings

5. Execute

ENTER

Waiting for Communicating...

If the communication is abnormal, such as a time-out, the display below will be

shown on the TP04G.