System information

Chapter 1 Overview and Installation

1-5

1-3-3 Programming Connection

The TP04G may use the RS232 or RS485 to connect to a PC. The

recommended connection is using the RS232 port and a DVPACAB215 cable.

1-4 Power connection

TP04G requires a 24VDC at 150mA power source for operation. Proper grounding

is required to filter any electrical noise and make sure the hardware components work

normally.

1-5 Cleaning

When cleaning the TP04G, please use soft cotton cloth and water. For stubborn

marks, a cleaning liquid may be used, but try a small section to verify it will not damage the

Mylar cover.