System information

Chapter 5 Examples

5-8

Step 7. If you check the item of “Read” and press

besides “Read”, it will also have the

window of “Device reference”. The settings should be set as following window. Then press

“OK” to escape this window.

Step 8. The button setting is the same as example 2. The value length is set to 16 bits, the

value type is hexadecimal, the function key can be F2 or others, button character is set to

frequency input, integer number and decimal number are all set to 2. Max. safety control is

set to 6000 due to decimal number is 2, the Max. frequency is 60.00.