System information

Chapter 1 Overview and Installation
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
1-4
1-2-2 Mounting
Mounting TP04G into the opening is done by carefully fitting the unit into the
opening and pressing firmly on all four corners.
Thickness:1.0 4.0mm〜
1-3 Connection
The TP04G may connect to a Delta DVP-PLC via a DVPACAB215 cable (Note 1). It
may also connect to other PLCs or AC drives using a user supplied cable. The TP
series may connect to more than one device using the 2-wire RS485 connection.
1-3-1 One-To-One Connection
When one PLC connects to a TP04G, the TP04G should be set to one-to-one
communication.
Figure 1
1-3-2 Multiple Link Connection
When many PLCs are connected to one TP04G or many TP04Gs are connected
together, the TP04G should be set to multiple link. Please refer to appendix B for detail.
The factory setting of communication address of TP04G is 1. Users may change
the “TP04 address” in system menu. All other communication settings may also be
updated in the system menu.
Figure 2