System information

Chapter 5 Examples

5-5

clear to display. You can also put the figure on the button.

Step 11. To press “OK” after finishing setting and this button will be used for the setting

functions.

Step 12. Choose “Compile” > “Compile” to compile the edition page.

Step 13. In TP04G, choose “1. download program TP04G PC” to download and it will

show “Waiting for communicating….“.

Step 14. In TPEdit, to choose “Communicate” > “TP write in” and press “OK” to download

program to TP04G.

Step 15. To modify PLC communication address according to PLC parameter setting.

Step 16. Using RS485 to connect TP and PLC. The connection method is to connect

negative terminal of RS485 of two PLC to negative terminal of RS485 of TP04G and

connect positive terminal of RS485 of two PLC to positive terminal of RS485 of TP04G.

Then choosing “5. Execute” in TP04G menu to execute.

TP04G

aster Workstation

The first PLC

Communication address=1

Slave Workstation

The second PLC

Communication address =2

Slave Workstation