System information

Chapter 5 Examples

5-4

Step 3. To choose ”Object

（

）

” and move mouse to working area. At this time, mouse

pointer will be cross pointer. To press left button and hold on to drag and the component

will show in window after you release the button.

Step 4. Double-click the left button of the mouse and you can see the following window.

Step 5. To click in the right side of button type and you can choose alternate type.

Step 6. To click

besides “Write” and the window of “Device reference” will be shown as

following. Here we set Y1 to control ON/OFF of Y1. That is very important to set the

communication address. If the communication address of the first PLC is 1 and then set it to

1, the communication address of the second PLC is 2 then set it to 2. Each PLC has its

communication address independently.

Step 7. If you check the item of “Read” and press

besides “Read”, it will also have the

window of device reference. You can set the device name, number and communication

address that you want to read and then press “OK” to return to the window.

Step 8. If you check the item of “Function key” and press

besides “Function key”, you

will get the pop-up menu. You can set it by yourself to control button components.

Step 9. You can set password to protect this component.

Step 10. Button text is to set the text on the button. The font size is usually 8X12 and is also