System information

Chapter 5 Examples

5-2

Step 4. Click the button of “BMP Read” in above window and the following window will be

shown. Please select the BMP file and click “Open (O

)” button. Then click “Yes” button in

the above window and the window of “Start-up Display” will be shown as following.

Step 4. In TP04G, choosing 1. download program TP04G PC. On TP04G screen, it

will show the words of “Waiting for communicating”.

Step 5. In TPEdit, choosing “Communication” > “Input user-defined start-up display” and

then press “Yes” for confirmation. It will start to download to TP04G and it will display the

progress during download. Start-up display can be downloaded without compiler.

Step 6. In TP04G, choosing “4. TP04G Settings” > “8. Start-up Display” > “User-defined” as

the following and you will finish the start-up display.

1. Download TP04G <-- PC

2. Upload TP04G --> PC

3. Copy TP04G <--> PC

. TP04G Settings

5. Execute

Start-up Display

1. TP04G Settings

2. User-defined

ENTER

5. Buzzer

6. Language Settings

7. Password Settings

. Start-up Display8

Note: You can set start-up display by yourself. But the picture must be monochromatic BMP

file and the Max. size should be 128X64. If you want to add text on it, the picture

should be smaller than 128X64 as shown in the following.