System information

Chapter 1 Overview and Installation
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
1-3
Command key Button Explanation
ENTER
Used to enter new data or confirm a message
ESC
Used to change the mode between user program
mode and system menu mode. Also to escape an
incorrect entry.
UP ARROW
Up key may be used to increase a value or to
move to the upper page.
DOWN ARROW
Down key may be used to decrease a value or to
move to the lower page.
LEFT ARROW
Left key is used to choose the decimal place of a
number.
RIGHT ARROW
Right key is used to choose the decimal place of a
number.
SHIFT
It is the shift key when using function keys F0 ~ F9
and other keys.
Chart 1-3 Explanations for function keys
Function
keys
Button Explanation
F0/F5
Function 0 (F0) or 5 (Shift+F0) in the system menu. Users
may define its function during programming.
F1/F6
Function 1 (F1) or 6 (Shift+F1) in the system menu. Users
may define its function during programming.
F2/F7
Function 2 (F2) or 7 (Shift+F2) in the system menu. Users
may define its function during programming.
F3/F8
Function 3 (F3) or 8 (Shift+F3) in the system menu. Users
may define its function during programming.
F4/F9
Function 4 (F4) or 9 (Shift+F4) in the system menu. Users
may define its function during programming.
1-2 TP04G Mounting
1-2-1 Panel Opening
The cut out for the TP04G must be 85.5mm x 137.5mm and the range of thickness
should be between 1.0~4.0mm.