System information

Chapter 3 TPEdit Software Operation

3-35

Latched button: the contact will be ON when you press and hold on. Once

you release the button, the contact is OFF.

Step 1. Choose Object (O

) > Button and move the mouse to the editing area. At the

moment, the mouse pointer will be cross pointer. You could press the mouse

and hold on to drag, once you release the button the component

will be displayed.

Step 2. Double-click left button and you will get the following dialog box.

Step 3. Pressing button at the right side of “Button Type” to select Interactive.

Step 4. Pressing

button at the right side of “Write” to select the reference device to

write. And pressing

button at the right side of “Read” to select the

reference device to read.

Step 5. Check Fun. Key and press

to select one of F0~F9. Please notice that

function keys F5~F9 should be used with Shift key. You should set it by

yourself, if you don’t set it and you can’t control the button component.

Step 6. Password setting is used to protect this button. If you set password for the

button, you should enter correct password before executing the button

function.

Step 7. Check “Call” and press

to choose to call which reference device. And

select “after writing” or “before writing” to Set or Reset. For example, if the

reference device is Y3 and check “after writing” to “set”. It will inform Y3 to set

after pressing the button.