System information

Chapter 3 TPEdit Software Operation
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
3-33
and min value in the dialog box.
Step 3. Progress set is used to set the direction for bar chart to increase and show on
the HMI screen.
Step 4. Max. value and min. value are the range for value to display. Only the value
between max. and min. value will be shown on the bar chart.
Step 5. After setting, HMI will read PLC corresponding register data and convert it to
bar chart to show on HMI screen.
!
Meter
Step 1. Choose Object (O
) > Meter >circle meter or click the button to get the
following dialog box.
Step 2. You could set reference device, value type, integer number, decimal number,
max. value, min. value, style, font, main scale and sub scale.
Step 3. The style could be 300 or 360 degrees. It means a circle is 300 or 360
degrees.
Step 4. After setting, HMI will read the PLC corresponding register data and convert it
to circle meter to show on HMI screen.