System information

Chapter 3 TPEdit Software Operation
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
3-28
Step 9. After setting, HMI will read PLC corresponding reference device to show the
value on HMI screen.
!
Bit Light
There are two types for you to choose:
State Show Setting: Choose Object (O
) > Bit Light (16X16) > State Show or click the
button
to set. When HMI reads the PLC corresponding
contacts (ON or OFF), it will show the corresponding figure.
Range Light Setting: choose Object (O
) > Bit Light (16X16) > Range Light or click the
button
to set. If you set as the following dialog box, When
the device value >= 300, base state is 0 and the figure will
display
.