System information

Preface

The TP series is a small HMI (human machine interface) with big features. It allows

users to monitor and control PLCs, Variable Frequency Drives, and other controllers. The

TP series may also be purchased with graphic capabilities (TP--G models). The TP series

products are programmed using the TPEdit software.

Getting Started

Users should read the entire manual before using the TPEdit software or TP series

hardware.

It is not recommended to use a button on the TP series product as an emergency

stop button. The TP series is powered by external power. If power is lost, the

emergency stop button will not work.

TP Series Hardware Introduction

Please refer to the information packaged with unit for details regarding dimensions

and specification of all TP models.

TP04G features:

Dimension: 140*90*27.5(mm)

Keypad: thin-film keypad with 5 user-defined function keys and 7 control keys.

Function keys: F0/F5, F1/F6, F2/F7, F3/F8 and F4/F9.

Control keys: Esc, Shift, Up/PgUp, Down/PgDn, Left, Right

Keystroke Life: Five hundred thousand. The keystroke life may

decrease due to environment (such as corrosive liquids or gas), object

used to depress keys, and the pressure used to depress the keys.

Display:

Monochromatic LCM, yellow-green back-light

TFT

! Resolution: 128X64 dots

Display dimensions: 66.5mm x 33.2mm (w x h)

Adjustable contrast

CPU: 16-bit

FLASH: 256K Bytes for user information

SRAM: 32K Bytes for system information

Communication Interface: RS232 (9Pin D-sub) and RS485

RTC with perpetual calendar (year, month, day, hour, minute, second,

week)