System information

Chapter 3 TPEdit Software Operation
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
3-10
!
Tpe Page Manager: manage the edited page.
!
Tpe Page: display edited HMI page and switch between HMI page and start-up
display.
!
Starting Figure: edit start-up display and switch between HMI page and start-up
display.
Transfer
!
Tp data read out: Read application program from TP04G to TPEdit.
!
Tp data write in: Write application program from TPEdit to TP04G.
!
Starting figure write in: input start-up display that edited by TPEdit into TP04G.
!
User menu write in: input user-defined user menu into TP04G.
Settings:
!
IDE Font: it is used to set the font attributes that used in TPEdit.
!
Communication Protocol: it is used to set communication format.
!
Page Size: it is used to set windows’ size.
!
Frame Settings: it is used to set using grid or not.
!
System page jump: when the conditions are held, it will jump to the designated
page. This is used for system to change page. It is not necessary to set change
condition for each page. Once the condition in each page is held, it will jump to
the designated page. (if the conditions of system change page conflicts with the