System information

Chapter 2 TP04G Operation and Settings
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
2-6
1. Transmission Rate 9600
2. Data Length
3. Parity Check Even
4. Stop Bit 1-bit
7-bit
RS232
ENTER
1. Transmission Rate 9600
. Data Length 7-bit
3. Parity Check Even
4. Stop Bit 1-bit
2
RS232
< >
!
Parity Check: The Left or Right arrow will scroll from Even to None, Odd. When
complete press the Enter key.
1. Transmission Rate 9600
2. Data Length 7-bit
3. Parity Check
4. Stop Bit 1-bit
Odd
RS232
ENTER
1. Transmission Rate 9600
2. Data Length 7-bit
. Parity Check Even
4. Stop Bit 1-bit
3
RS232
< >
!
Stop bit: The Left or Right arrow will toggle between 1-bit or 2-bit. When
complete press the Enter key.
1. Transmission Rate 9600
2. Data Length 7-bit
3. Parity Check Even
4. Stop Bit 1-bit
RS232
ENTER
1. Transmission Rate 9600
2. Data Length 7-bit
3. Parity Check Even
. Stop Bit 1-bit4
RS232
< >
C. RS485
The process of setting the RS485 protocol, are the same as the RS232. Please refer
to the above procedures for setting this communication port.
2-3-2 Contrast
!
To change the contrast of the display, select option “2. Contrast” and use the Left
and Right arrows to move the bar graph. When complete press the enter key.
1. Communication Protocol
. Contrast
3. Back-lighted
4. Date and Time
2
Contrast
ENTER
< >
-
+
2-3-3 Back-light
!
Editing the Back Light auto off time: Use the Left and Right arrows to choose the
digit and the Function keys (F0-F4) to choose the value of time in minutes. When
complete press the Enter key.