System information

Chapter 2 TP04G Operation and Settings
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
2-4
2-2-4 TP04G Settings
!
When choosing option 4 “TP04G Settings”, there will be two displays (8 total
options) to choose for set up.
1. Download TP04G <-- PC
2. Upload TP04G --> PC
3. Copy TP04G <--> PC
. TP04G Settings
5. Execute
4
ENTER
1. Communication Protocol
2. Contrast
3. Back-lighted
4. Date and Time
5. Buzzer
6. Language Settings
7. Password Settings
8. Start-up Display
!
Please refer to section 3 for details of the TP04G set-up menu.
2-2-5 Execute program
!
Choosing the Execute mode, causes the TP series product to leave the System
Menu and begin monitoring your connected components.
1. Download TP04G <-- PC
2. Upload TP04G --> PC
3. Copy TP04G <--> PC
4. TP04G Settings
. Execute 5
Display T0 Counter Value
ENTER
0
25 50
75
100
!
Before entering the monitor mode, the TP series product will display the start-up
window “TP04G”. Once the TP04G disappears, the monitor mode is active and
the TP series product will use the users created program.
!
Users may use the TPEdit software to customize the start-up display.
2-3 TP04G Settings Menu
After entering the TP04G settings menu, the user is given 8 options to choose from.
The programming of each of these 8 options, are described below.
2-3-1 Communication Protocol
.
1. Communication Protocol
2. Contrast
3. Back-lighted
4. Date and Time
Communication Protocol
1. TP04G Settings
2. RS232
3. RS485
ENTER
A. TP04G Communication Protocol
!
Select option 1 “TP04G Settings” and the following display will appear.