System information

Chapter 2 TP04G Operation and Settings

2-3

2-2-3 Copy TP04G <-->TP04G

The Copy function allows the user to move a program from on TP04G to another

TP04G via communication. Connection must be done, using twisted pair wire

connected between two TP04G RS485 communication ports.

Below is a pictorial description of the process.

1. Download TP04G <-- PC

2. Upload TP04G --> PC

. Copy TP04G <--> PC

4. TP04G Settings

5. Execute

1. Transmit Program

2. Receive Program

ENTER

Users must select which TP04G will receive the program and then select which

TP04G will transmit the program. Once the option to Transmit is selected the

Tpo4G will begin communication, therefore always do this step last. During the

transmission a progress display will be shown as below.

1. Transmit Program

2. Receive Program

1. Transmit Program

. Receive Program2

Waiting for Communicating...

ENTER

If the communication is abnormal, such as a time-out, the display below will be

shown on the TP04G.

Waiting for Communicating...

Time Out

Esc

: Escape

Enter

: Retry

The following display is shown when communication is complete.

Communication is Completed.

Esc

: Escape