Datasheet

DS_SH01S/D_02182013 E-mail: [e-mail]
http:// www.deltaww.com/dcdc
P3
Output Voltage Tolerance
(3.3V & 5V Output) (All other Output)
Power Derating Curve
Output Power (%)
Notes
1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2 Ripple & Noise measurement bandwidth is 0-20MHz.
3 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will
not damage these modules; however they may not meet all specifications listed.
4 All DC/DC converters should be externally fused at the front end for protection.
5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
6 Specifications subject to change without notice.
7 It is not recommended to use water-washing process on SMT units.
0% 20% 40% 60% 80% 100%
Output Voltage(%)
Output Load Current (%)
M
a
x
.
T
y
p
.
+5%
+10%
+15%
Vnom
-5%
-10%
+20%
+5%
+10%
+15%
Vnom
-5%
-10%
+20%
M
i
n
.
0% 20% 40% 60% 80% 100%
Output Voltage(%)
Output Load Current (%)
M
a
x
.
T
y
p
.
+5%
+10%
+15%
Vnom
-5%
-10%
+20%
+5%
+10%
+15%
Vnom
-5%
-10%
+20%
M
i
n
.