Datasheet

ManualsBrandsDelta Electronics ManualsPower SupplySeries 240W

TECHNICAL DATASHEET

CliQ DIN Rail

Power

Supply

24V 240W 1

Phase

/ DRP024V240W1AA

All parameters are specified at 25°C ambient unless otherwise noted.

www.DeltaPSU.com (December 2012, Rev. 02)

Highlights & Features

– Reliable design, with expected life of 10 years

– Compact, rugged design for ease of handling and installation

– Multiple connections to terminals allowed

– Designed for Class I Div. 2 Hazardous Locations environments

– Meets worldwide safety requirements

– RoHS Directive 2011/65/EU Compliant

– Worldwide AC input range without power de-rating

– Overvoltage / Overcurrent / Over Temperature Protections

– 150% Power Boost (steady state peak load) for 3 seconds

Safety Standards

CB Certified for worldwide use

Model Number: DRP024V240W1AA

Unit Weight: 1.04 kg

Dimensions (L x W x D): 121 x 85 x 118.5 mm

General Description

The DRP024V240W1AA is part of the CliQ series of DIN Rail power supplies from one of the world’s largest power supply manufacturers

and solution providers - Delta. This product provides an adjustable output capable of operating from input voltages at 85-264Vac, and a

wide temperature range of -20°C to 75°C. With a rugged, compact plastic case design that meets shock and vibration requirements (in

accordance to IEC60068-2-27 and IEC60068-2-6 respectively), and conformal-coated PCB assembly, this state of the art design is well

suited to a broad variety of industrial applications worldwide.

Model Information

CliQ DIN Rail Power Supply

Model

Number

Input Voltage Range

Output

oltage

Output Curr

ent

DRP024V240W1AA

85-264Vac (120-375Vdc)

24Vdc

10A

Model Numbering

DRP

024V

240W

DIN Rail

Power Supply

Output Voltage

Output Power

Single Phase

CliQ Series

Metal Case

Summary of content (11 pages)

PAGE 1
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Highlights & Features – – – – – – – – – Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed Designed for Class I Div.
PAGE 2
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Specifications Input Ratings / Characteristics Nominal Input Voltage 100-240Vac Input Voltage Range 85-264Vac Nominal Input Frequency 50-60Hz Input Frequency Range 47-63Hz Nominal DC Input Voltage 125-250Vdc DC Input Voltage Range 120-375Vdc Input Current < 2.90A @ 115Vac, < 1.50A @ 230Vac Efficiency > 89.0% @ 115Vac, > 91.
PAGE 3
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Environment Surrounding Air Temperature Operating -20°C to +75°C Storage -25°C to +85°C Power De-rating > 50°C de-rate power by 2.
PAGE 4
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Safety Standards / Directives Electronic Equipment in Power Installations EN50718 / IEC62103 Electrical Safety SIQ to EN60950-1, UL/cUL recognized to UL60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC60950-1, CSA to UL60950-1 and CSA C22.2 No. 60950-1 (File No. 181564) Industrial Control Equipment UL/cUL listed to UL508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 (File No.
PAGE 5
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Block Diagram Device Description 1) 2) 3) 4) 5) 5 Input terminal block connector Output terminal block connector DC voltage adjustment potentiometer DC OK control LED (Green) Universal mounting rail system All parameters are specified at 25°C ambient unless otherwise noted. www.DeltaPSU.com (December 2012, Rev.
PAGE 6
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Dimensions L x W x D: 121 x 85 x 118.5 mm Engineering Data De-rating Note 1. 2. 3. 4. Fig. 1.1 De-rating for Vertical Mounting Orientation > 50°C de-rate power by 2.5% / °C, > 70°C de-rate power by 4% / °C 6 All parameters are specified at 25°C ambient unless otherwise noted. www.DeltaPSU.com (December 2012, Rev. 02) 5.
PAGE 7
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Output De-rating VS. Input Voltage ■No output power de-rating across the entire input voltage range Assembly & Installation The power supply unit (PSU) can be mounted on 35mm DIN rails in accordance with EN60715. The device should be installed with input terminal blocks at the bottom. Each device is delivered ready to install. Mounting Dismounting Fig. 2.1 Mounting Fig. 2.
PAGE 8
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Safety Instructions – – – – – – – – ALWAYS switch mains of input power OFF before connecting and disconnecting the input voltage to the unit. If mains are not turned OFF, there is risk of explosion / severe damage. To guarantee sufficient convection cooling, keep a distance of 50mm above and below the device as well as a lateral distance of 20mm to other units.
PAGE 9
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Inrush Current Surge Load Inrush current is the peak, instantaneous, input current measured and, occurs when the input voltage is first applied. For AC input voltages, the maximum peak value of inrush current will occur during the first half cycle of the applied AC voltage. This peak value decreases exponentially during subsequent cycles of AC voltage.
PAGE 10
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Over Temperature Protection Short Circuit Protection As mentioned above, the power supply also has Over Temperature Protection (OTP). This is activated when the overload condition persists for an extended duration and the output current is below the overload trigger point but >100% load.
PAGE 11
TECHNICAL DATASHEET CliQ DIN Rail Power Supply 24V 240W 1 Phase / DRP024V240W1AA Others Delta RoHS Compliant Restriction of the usage of hazardous substances The European directive 2011/65/EC limits the maximum impurity level of homogeneous materials such as lead, mercury, cadmium, chrome, polybrominated flame retardants PBB and PBDE for the use in electrical and electronic equipment.