Datasheet

ManualsBrandsDELTA ELECTRONICS ManualsPSU ComponentsDC/DC converter (print) 15 Vdc, -15 Vdc 330 mA 10 W No. of outputs: 2 x

S24SE/S24DE series

10W Single/Dual Output DC/DC Converter

DS_ S24SE/S24DE 10W _ 06032014 E-mail:DCDC@delta.com.tw

http://www.deltaww.com/dcdc

Model List

Model

Number

Input

Voltage

(Range)

Output

Voltage

Output Current

Input Current

(typ input voltage)

Load

Regulation

Maxcapacitive

Load

Efficiency

(typ.)

Max.

Min.

@Max. Load

@No Load

@Max. Load

VDC

mA(typ.)

S24SE3R303

(9 ~ 36)

3.3V

3000

490

±10

10000

87%

S24SE05002

5.0V

2000

490

±10

10000

87%

S24SE120R8

12V

830

500

±12

470

86%

S24SE150R6

15V

670

490

±15

470

87%

S24DE120R4

±12V

420

490

±120

±470

87%

S24DE150R3

±15V

330

490

±150

±470

87%

Input Characteristics

Item

Model

Min.

Typ.

Max.

Unit

Input Surge Voltage (100 msec)

All Models

VDC

Input Turn-On Voltage Threshold

All Models

8.5

VDC

Input Turn-Off Voltage Threshold

All Models

7.5

VDC

Input Under-Voltage Lockout Hysteresis

All Models

0.4

1.7

VDC

Off-Converter Input Current

All Models

Input reflected ripple current

All Models,with 12uH, 20MHz

Reverse Polarity Input Current

All Models

---

0.3

ON/OFF Control, Logic High

All Models

2.4

VDC

ON/OFF Control, Logic Low

All Models

-0.7

0.8

VDC

Input Filter

All Models

Internal PI Filter

FEATURES

 Efficiency up to 87%

 Wide input range, 9V-36V

 Package with Industry Standard Pinout

 Package Dimension:

25.4 x25.4 x10.2mm (1.0” x1.0” x0.40”)(No HSK)

31.0 x25.4 x17.5mm (1.22” x1.00” x0.69”)(HSK)

 Over voltage protection, hiccup mode

 Over current protection, hiccup mode

 Positive or Negative Remote ON/OFF

 Without tantalum capacitor inside module

 Operating Temperature range - 40°C to +85°C

 Input to Output Isolation: 1600VDC

 RoHs Compliant

 3 Years Product Warranty

 Heat-sink is option

 UL60950, 2

Edition, 2011-12-19 Recognized

The S24SE/S24DE series is miniature, isolated 10W DC/DC converters with 1600VDC isolation. The S24SE/S24DE family comes with

a host of industry-standard features, such as over current protection, over voltage protection, over temperature protection and remote on/off.

An optional heatsink is available for more extreme thermal requirements. All models have an untra-wide 4:1 input voltage range (9V to 36V).

With operating temperature of -40°C to +85°C, it is suitable for customers’ critical applications, such as process control and automation,

transportation, data communication and telecom equipment, test equipment, medical device and everywhere where space on the PCB is

critical.

Summary of content (12 pages)

PAGE 1
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter FEATURES  Efficiency up to 87%  Wide input range, 9V-36V  Package with Industry Standard Pinout  Package Dimension: 25.4 x25.4 x10.2mm (1.0” x1.0” x0.40”)(No HSK) 31.0 x25.4 x17.5mm (1.22” x1.00” x0.
PAGE 2
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter Output Characteristics Item Output Voltage Accuracy Output Voltage Balance Conditions Dual Output, Balanced Loads Single output Dual output Dual output,Asymmetrical Load 25%-100% Full Load Over Load, Line and Temperature 12V, 15V, ±12V, ±15V 3.3V, 5.0V 50%-75% full load, 0.
PAGE 3
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24SE05002, 9-36VIN, 5.0V/2A 90 1.9 87 POWER DISSIPATION(W) 36Vin 84 EFFICIENCY(%) 81 78 24Vin 75 36Vin 72 9Vin 69 1.7 24Vin 1.5 1.3 9Vin 1.1 0.9 66 0.7 63 0.5 60 0.4 0.6 0.8 1 1.2 1.4 1.6 OUTPUT CURRENT(A) 1.8 2 Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (10ms/div). Top Trace: Vout; 2V/div; Bottom Trace: ON/OFF input: 5V/div. 0.
PAGE 4
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24SE120R8, 9-36VIN, 12V/0.83A 2.0 89 87 POWER DISSIPATION(W) 85 EFFICIENCY(%) 83 81 79 36Vin 77 24Vin 9Vin 75 73 71 1.8 36Vin 1.5 24Vin 1.3 9Vin 1.0 69 67 0.8 65 63 0.5 0.2 0.3 0.4 0.5 0.6 0.7 0.8 OUTPUT CURRENT(A) Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (4ms/div).
PAGE 5
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24DE120R4, 9-36VIN, ± 12V/0.42A 89 2.0 87 1.9 1.8 POWER DISSIPATION(W) 85 EFFICIENCY(%) 83 81 79 36Vin 24Vin 77 9Vin 75 73 1.7 36Vin 1.6 1.5 24Vin 1.4 1.3 1.2 9Vin 1.1 71 1.0 0.9 69 0.8 0.7 67 0.6 65 0.5 0.1 0.15 0.2 0.25 0.3 0.35 0.4 OUTPUT CURRENT(A) Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (10ms/div).
PAGE 6
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter ELECTRICAL CHARACTERISTICS CURVES - S24DE150R3, 9-36VIN, ± 15V/0.33A 2.0 87 1.9 85 1.8 POWER DISSIPATION(W) 89 EFFICIENCY(%) 83 81 79 24Vin 36Vin 77 9Vin 75 73 71 36Vin 1.7 24Vin 1.6 1.5 9Vin 1.4 1.3 1.2 1.1 1.0 69 0.9 67 0.8 0.7 65 0.6 63 0.1 0.15 0.2 0.25 0.3 OUTPUT CURRENT(A) Efficiency vs. load current for various input voltage at 25°C. Turn-on transient at full load current (10ms/div).
PAGE 7
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter DESIGN CONSIDERATIONS Input Source Impedance The impedance of the input source connecting to the DC/DC power modules will interact with the modules and affect the stability. A low ac-impedance input source is recommended. If the source inductance is more than a few μH, we advise a 47μF electrolytic capacitor mounted close to the input of the module to improve the stability.
PAGE 8
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter DESIGN CONSIDERATIONS Layout and EMI considerations FEATURES DESCRIPTIONS Over-Current Protection Delta’s DC/DC power modules are designed to operate in a wide variety of systems and applications. For design assistance with EMC compliance and related PWB layout issues, please contact Delta’s technical support team. An external input filter module is available for easier EMC compliance design.
PAGE 9
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter For 12V signle output(Kohm): For 15V single output(Kohm): Remote on/off implementation Output Voltage Adjustment(TRIM) Only single output modules has output adjust function. To increase the output voltage set point, connect an external resistor between the TRIM pin and the Vout(-). To decrease the output voltage set point, connect an external resistor between the TRIM pin and the Vout(+).
PAGE 10
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter Mechanical Drawing Mechanical Dimensions Pin Connections Single Output Pin Function Dual Output Function 1 Vin+ Vin+ 2 Vin- Vin- 3 On/off On/off 4 Vout- Vout- 5 Trim Common 6 Vout+ Vout+ Physical outline Case Size: 25.4*25.4*9.5(1.0”*1.0”*0.
PAGE 11
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter Mechanical Drawing with heat sink(optional) Mechanical Dimensions Physical Outline 1 Heat sink Material: Al-6063 Finish: anodize black Weight: 4grams 2 Clamp Material: spring steel Finish: Nickel plating 3 Thermal pad Material: Sil-pad Thermal conductivity: 1.6W/m-K 4 Model weight: 22.5 grams  All dimensions in mm (inches)  Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.010) Note: 1.
PAGE 12
S24SE/S24DE series 10W Single/Dual Output DC/DC Converter Part Numbering System S 24 Form Input S E 050 02 P Product Output Output On/off series voltage current logic E- 050 – 5.0V 02 - 2A D F A Number of factor voltage Pin length Option Code output S 24 – 9~36V S - Single D - Dual N- Series Negative No. P - Positive D - 0.24” F - RoHS 6/6 (Lead Free) A – Standard. (with metal T - 0.22” case) R - 0.17” H – With heat sink CONTACT: www.deltaww.