User's Manual

Doc #: 1ANSU-160004
DNI SGDC-D22 User Manual
i. 18
When ADSL modem is ready to use, please use Ethernet cable to connect DCU and ADSL modem and execute the
following command to connect to your ISP.
First, you need to setup the parameters for the PPPoE connection.
# pppoe-setup
Please answer the following questions:
>>> Enter your PPPoE user name: your_username
>>> Enter the Ethernet interface connected to the DSL modem: (default eth0): eth0
>>> Enter the demand value (default no): no
>>> Enter the DNS information here: server (Please enter a specific DNS server IP when ISP has provided it to you.)
>>> Please enter your PPPoE password: your_password
>>> Choose a type of firewall (0-2): 0
>>> Accept these settings and adjust configuration files (y/n)? y
After setting up parameters, use the following command to conect to the remote server:
# pppoe-start
When the connection is built up, there will be a message “… Connected! ” on the console.
Figure 12, Connect and disconnect with PPPoE.