User's Manual

Doc #: 1ANSU-160004
DNI SGDC-D22 User Manual
i. 9
4. Getting Started
4.1. Connect to PC
DNI data collector provides two interfaces for PC to login, configure and maintenance. Users can connect to a PC
through a serial console port (RS-232) or by using SSH utility over the network connection. This section will describe
how to connect DNI data collector to PC through these two interfaces.
4.1.1. Serial Console Port (RS-232)
When using the serial console port to connect, first, make sure the console cable is correctly connected between DNI
data collector and a host PC.
Then open a serial port terminal emulator (e.g. Hyper Terminal or PuTTY) and fill the port settings as shown in the
following table.
Baud Rate
115200 bps
Parity
None
Data Bits
8
Stop Bit
1
Flow Control
None
Figure 3, Hyper Terminal Com Port Properties.