Specifications

2
IMPORTANT SAFETY INSTRUCTIONS
Save These Instructions! This manual contains important instructions for our
UPS that should be followed during installation and maintenance of the UPS
and batteries.
 The UPS has an internal battery supply. The nominal rating voltage of battery supply is
24V, 48V, 72V for 1KVA, 2KVA and 3KVA UPS individually no matter what model of
the 1KVA, 2KVA and 3KVA UPS.
 To reduce the risk of electric shock, install this UPS in a temperature and humidity
controlled indoor area free of conductive contaminants. Ambient temperature must not
exceed 40°C (104°F)
 The AC output of the UPS need a disconnect switch such as a breaker which has to be
provided by others.
 The over-current protection for the output AC circuit has to be provided by others. All of
our UPS have an electronic protection of AC output short circuit.
 Servicing of batteries should be performed or supervised by personnel who are
knowledgeable about batteries and the required precautions. Keep unauthorized
personnel away from batteries.
 When replacing batteries, replace with the same number of the: LC-R129
(PANASONIC), REW45-12 (YUASA), HR9-12 (BB), and HR1234F2 (CSB).
 CAUTION! Do not dispose of battery or batteries in fire. The battery may explode.
 CAUTION! Do not open or mutilate the battery or batteries. Released electrolyte is
harmful to the skin and eyes. It may be toxic.
 CAUTION! A battery can present a risk of electrical shock and high short circuit current.
The following precautions should be observed when working on batteries:
 Remove watches, rings, or other metal objects.
 Use tools with insulated handles.
 Wear rubber gloves and boots.
 Do not lay tools or metal parts on top of batteries.
3