Specifications

12
Rear Panel
The rear panel is explained as follows: (Please refer to Figure 2-2.1 and 2-2.2)
Figure 2-2.1 (1KVA Rear Panel)
Figure 2-2.2 (2KVA & 3KVA Rear Panel)
1. OUTPUT RECEPTACLES: The UPS supplies AC power to the load.
2. I/P BREAKER: To prevent the UPS from damages caused by the high
input current
3. INPUT SOCKET: AC input utility supplies power to the UPS via the
socket.
4. SNMP SLOT: A SNMP adapter can be plugged in this port for managing
the UPS on network. Please refer to section four for more detailed
information. (Optional)
5. TVSS (Transient Voltage Surge Suppressor) (RJ-45/RJ-11 SURGE
PROTECTOR): These connectors are used to prevent damages caused
by surge, noise and spike traveling from the telephone or network line.
24V DC
INPUT
10
REPO
5
SURGE PROTECTOR
OUTIN
96
SNMP SLOT
40A
RS232
32
INPUT
BREAKER
71
LOAD 1
48
LOAD 2
1396105
INPUT
INPUT
BREAKER
2
LOAD 1
SNMP SLOT
LOAD 3
SURGE PROTECTOR
OUTIN
48V DC
40A
REPO
RS232
LOAD 2
4781
13