Datasheet

DS_FL75L07_02162012
4
APPLICATION
Note: C2 & C3 can be 0.01μF to 0.1μF. Select the voltage rating to meet input-to-output isolation requirements. C1 should be the recommended value
suggested in the power module data sheet.
Figure 7. Recommended schematic when used as the input filter to a high-frequency with open-frame dc-to-dc converter
Note: Avoid routing signals or planes under the power module or the filter module. Please ensure all connections are low impedance.
Figure 8. Recommended layout when used as the input filter to a high-frequency with open-frame dc-to-dc converter