Datasheet

DS_E36SR12004_06192012
11
MECHANICAL DRAWING (WITHOUT HEAT SPREADER)
NOTE: have a typical height of the lowest component (who has to dissipate) of 7.25mm with a tolerance
plus max height module/minus 0 mm.
Pin No. Name Function
1
2
3
4
5
6
7
8
+Vin
ON/OFF
-Vin
-Vout
-Sense
Trim
+Sense
+Vout
Positive input voltage
Remote ON/OFF
Negative input voltage
Negative output voltage
Negative remote sense
Output voltage trim
Positive remote sense
Positive output voltage
Pin Specification:
Pins 1-3,5-7 1.00mm (0.040”) diameter
Pins 4 & 8 1.50mm (0.059”) diameter
Note：All pins are copper alloy with matte-tin(Pb free) plated over Nickel underplating.