Product data

DeltaV Product Data Sheet
October 2014 – Page 41 S-Series Electronic Marshalling
Ordering Information
Low Voltage Instrumentation CHARMs
Description Model Number
DI NAMUR
SE4301T01
DI 24 VDC low-side sense (dry contact)
SE4301T02
DI 24 VDC Isolated
SE4301T07
DO 24 VDC High-Side
SE4302T01
DO 24 VDC Isolated
SE4302T02
DO 24 VDC 100mA Energy Limited
SE4302T04
24 VDC Power
SE4302T05*
AI 4-20 mA HART
SE4303T01
Thermocouple/mV Input
SE4303T02
RTD Input
SE4303T03
AI 0-10 VDC Isolated
SE4303T04
AO 4-20 mA HART
SE4304T01
High Voltage Instrumentation CHARMs
Description Model Number
DI 120 VAC Isolated
SE4301T03
DI 120 VAC Isolated Plus
SE4301T05**
DI 230 VAC Isolated
SE4301T04
DO VAC Isolated
SE4302T03
Low Voltage Instrumentation CHARMs and Terminal Block Assembly’s
Description Model Number
DO 24 VDC High-Side CHARM with Relay Output Terminal Block
SE4302T51
Thermocouple/mV Input CHARM with Thermocouple/mV Terminal Block
SE4303T52
24 VDC Power CHARM with Fused injected Power Terminal Block
SE4302T55*
Prerequisites
S-Series Electronic Marshalling hardware requires DeltaV v11.3.1 or later software.
* 24 VDC Power CHARM requires DeltaV v12.3.or later software to be able to configure and use the Diagnostic Information
** DI 120 VAC Plus CHARM requires DeltaV v13.3.or later software be able to configure and use the CHARM