Product data

DeltaV Product Data Sheet
October 2014 – Page 37 S-Series Electronic Marshalling
Hazardous Area/Location:
S-series Electronic Marshalling can be installed and used based on the following Standards:
 FM (USA):
Installation and Field Circuits:
Class I, Division 2, Groups A, B, C, D, T4
 cFM (Canada):
Installation and Field Circuits:
Class I, Division 2, Groups A, B, C, D, T4
 ATEX:
Installation and Field Circuits:
Ex nA IIC T4 Gc
Ex nA [nL] IIC T4 Gc
Ex nA [ic] IIC T4 Gc
Ex nA nC IIC T4 Gc
 IEC-Ex:
Installation and Field Circuits:
Ex nA IIC T4 Gc
Ex nA nL IIC T4 Gc
Ex nA ic IIC T4 Gc
Ex nA nC IIC T4 Gc
Regarding the Installation instructions please refer to the following Documents:
Class 1 Division 2 Installation Instructions CHARM Subsystem 12P5401 Rev. F
Class 1 Division 2 Installation Instructions DeltaV S-Series 12P5402 Rev. C
Zone 2 Installation Instructions CHARM Subsystem 12P5403 Rev. G
Zone 2 Installation Instructions DeltaV S-Series 12P5404 Rev. C