Product data

DeltaV Product Data Sheet
October 2014 – Page 34 S-Series Electronic Marshalling
System Compatibility
CHARM I/O hardware requires:
 SD Plus controllers with DeltaV v11.3.1 or later
software
 SX controllers with DeltaV v11.3.1 or later software
 SQ controllers with v11.3.1 or later software
S-series Controllers with CHARMs I/O and M-series
controllers can be installed on the same DeltaV Area
Control Network in v11 and beyond.
Control modules can be assigned to either series of
controller and inter-controller references are fully
supported between controller series.