User manual

10
 Mounting
Step-1. Insert the controller through the panel cutout.
Step-2. Insert the mounting bracket into the mounting groove at the top and bottom of the controller and push the
mounting bracket forward until the bracket stops at panel wall.
Step-3. Insert and tighten screws on bracket to secure the controller in place.
(The screw torque should be 0.8kgf-cm to 1.5kgf-cm)
1
3
2
 Mounting Bracket Installation
1. 2.
 CT Wiring Method (if CT function is selected)
0
6
.
8
m
m
M
a
x
.
Contact Information:
ASIA
DELTA ELECTRONICS, INC.
TAOYUAN Plant/
31-1, SHIEN PAN ROAD,
KUEI SAN INDUSTRIAL ZONE
TAOYUAN 333, TAIWAN
TEL: [phone]
FAX: [phone]
NORTH/SOUTH AMERICA
DELTA PRODUCTS CORPORATION
Sales Office/
P.O. BOX 12173
5101 DAVIS DRIVE
RTP, NC 27709 U. S. A.
TEL: [phone]
FAX: [phone]
EUROPE
DELTRONICS (Netherlands) B.V.
Sales Office/
DE WITBOGT 15
NL-5652 AG EINDHOVEN
The NETHERLANDS
TEL: [phone]
FAX: [phone]