Specifications

7
Regulate temperature
deviation value
Press
Return to temperature display
Output value display
and adjust
Press
A
larm 2 setting
Press
Press
Regulate 20mA output
deviation value
(Display when current output)
Communication write in
disable/enable
(only available when the controller
has RS-485 function)
Press
Return to auto-tuning setting
Press
Regulate 4mA output
deviation value
(Display when current output)
Press
Communication
address setting
(only available when the controller
has RS-485 function)
Communication baud
rate setting
Press
(only available when the controller
has RS-485 function)
Communication data
length setting
Press
Communication data
length setting
Press
(only available when the controller
has RS-485 function)
Press
Communication parity
bit setting
(only available when the controller
has RS-485 function)
Communication stop
bit setting
Press
Return to input type setting
(only available when the controller
has RS-485 function)
 Heating and Cooling Functions
There are two functions to control temperature, heater and cooler. The heating function actuates when
the process temperature (PV) is getting down and the cooling function cools when the process
temperature is getting high. It is impossible to operate both functions simultaneously in this controller,
therefore only one function can be selected and it is either heating function or cooling function.