Specifications

3
 Electric Specifications
Power Supply Voltage 100 to 240VAC 50/60Hz
Operation Voltage Range 85% to 110% of rated voltage
Power Consumption 5VA
Display Method
7-segment digit LED Display
Process value (PV): Red color, Set point (SV): Green color
Thermocouple: K, J, T, E, N, R, S, B
Input Temperature Sensor
Platinum resistance thermometer (RTD): Pt100, JPt100
Control Method PID or ON/OFF control or manual tuning
Relay output: SPDT (4848 series is SPST), 250VAC, 5A
Voltage Pulse output: DC 14V, Max. load current 40mA
Control Output
Current output: 4 to 20mADC (Load resistance: Max. 600Ω)
Display Accuracy 0.1% of measuring range
Sampling Time 0.5 sec
Vibration Resistance 10 to 55Hz, 10m/s
2
for 10min, each in X, Y and Z directions
Shock Resistance Max. 300m/ s
2
, 3 times in each 3 axes, 6 directions
Operation Temperature
0 to 50
Storage Temperature
-20 to +65
Installation Site Altitude 10000ft.
Ambient Humidity 35% to 85% RH (non-condensing)
 Parameters List
1. Operation function mode: Perform per the settings of related control parameters
LED Display Explanation Default
RUN/STOP: Control setting begins. Run (
) or Stop ( )
mode on the SV display.
RUN
ALARM1 HIGH: Upper-limit alarm 1
4.0
ALARM1 LOW: Lower-limit alarm 1
4.0
ALARM2 HIGH: Upper-limit alarm 2
4.0
ALARM2 LOW: Lower-limit alarm 2
4.0
Setting lock: Lock 1 (
), Lock 2 ( ) or OFF ( )
on the SV display. Lock 1 mode can lock all settings and Lock 2 mode only
can lock others than SV value. When OFF mode is selected, the Lock
function will be OFF. If you press and key simultaneously, the
“Lock” status can be released and the controller will be back to the
previous display.
OFF