ADDENDUM FOR THE DLP PROJECTOR About this Document This document is intended for network administrators. Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this document, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright July, 2004 Disclaimer The information in this document is subject to change without notice.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) I. OPERATING ENVIRONMENT Computer Configuration Recommended Hardware requirements: CPU: Intel Pentium II or higher Memory: 128M or more Wireless NIC: based on 802.11b protocol OS: Windows 2000 (Chinese/English version) Windows XP (Chinese/English version) Windows 98 is not supported. Recommended NIC models 802.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) II. FUNCTIONAL OVERVIEW Wireless Projector Developed and manufactured by Lenovo independently, the wireless projectors has integrated the IGRS technology (automatic search, automatic identification and automatic configuration). Avoid the fussy setup process of the wireless projector you have experienced before. With Lenovo wireless projector, you will get a rapid response plus smooth and natural projection.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) TDW680 applications allow user to perform quick projection to the binding projector by using hotkeys (Ctrl+F5), making the projection more convenient. 9. NIC Management TDW680 allows user to select one of the wireless NICs to project, enjoying the fun of both Internet Surfing and projecting. 10.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) III． LENOVO WIRELESS PROJECTOR SERVICE PROGRAM Installation and Uninstallation Description of installation and uninstallation in this section is under Windows XP OS, the screen and text maybe have light difference if using Windows 2000 OS. Installation 1. Insert the “TDW680 Wireless projector” CD to CD-ROM driver, and CD will run automatically, select “English”, then click “Software Installation”.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Note: Select “Change...” to change the installation path. 3.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) 4. You will get a prompt of “Windows Logo testing”, click “Continue Anyway”. 5.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) 6. The following prompt will appear during the installation of Lenovo IGRS, click “Yes” to continue. 7.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Notes: Select “Add Desktop Shortcut” to run the “Lenovo Wireless Projector” program more conveniently. 8. The following screen will appear, Click “Finish” to complete the installation, your computer will be restarted now or later according to your choice. Note 1: The projector can be operated normally only after restarting the computer.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Note 2: IGRS will be installed automatically while you install the program, but it is not be uninstalled when you uninstall the program. Uninstallation 1. When uninstalling, please click “Start/applications/Lenovo Wireless Projector” on the bottom left corner of the computer screen, and select “Uninstall Lenovo Wireless Projector”. as shown below: 2. The following screen will appear, click “Yes” to confirm the uninstallation.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Note: The projector can be operated normally only after restarting the computer.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Function Description: Lenovo Wireless Projection Program mainly includes multi-functions, such as Starting, Refreshing, Starting projection, Quick projection, Viewing the Attribute of the wireless projector, Project configuration, Switch card, Controller, USB play, End the projection and Quit, etc.. 1. Starting You should turn on the Wireless projector before starting the wireless project.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) After starting the Wireless Projection, the Refresh screen will display and the “Lenovo Wireless Projector” tray icon will appear on the bottom right corner of the screen. If you put the mouse point over the tray icon, you may see the information about the current wireless projection. 2.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Notes: If no wireless card is found, the system will give you a message: At the same time, the tray icon on the bottom right corner of the PC screen will display as gray, if you put the mouse point over the icon, you may see a message of “Current card: Not found!”. Please plug in the wireless NIC, and then try again! 3.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) After selecting the projector, right click the blue mark to display “Right key menu”, and then select “Project”, and the selected projector will perform the wireless project, as shown below: While performing the wireless projection, if you put the mouse point over the “Lenovo Wireless Projector” tray icon on the bottom right corner of the screen, you may see relevant information such as Projector ID, NIC used and Signal intensity etc.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) After starting the wireless project program and one projector has been bound, you may perform the quick projection to the binding projector by using hotkeys (Ctrl+F5).
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Status of Projector: You may view the attribute of projector, there are five main working status of projector: Ready, being used by other users, ongoing USB play, ongoing wired projection and Unknown. The projector in Ready status is available for use. Projector’s attribute can not be viewed if the projector is performing the wireless projection. 6.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Configuration: select “Configuration”, Project configuration and Switch card can be selected by using “Configuration” window. About: Select “About”, you may check the Version information of “Lenovo Wireless Projector Service Application”, as shown below: Quit: Select “Quit” to close “Lenovo Wireless Projector Service Application”.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) If “Quick projection” is checked, which means to allow user to bind the projector. The default is checked. ID number of the binding projector will appear in the box below “Quick projection”, as shown above. When you use press hotkeys (Ctrl+F5) to perform the quick projection, you may see the projecting confirmation dialog, as shown below: Click “Yes” button to perform the quick projection; or click “No” button to cancel the quick projection.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) If you want to disable the binding projector function or quick projection function, you may unselect the “Quick Projection” checkbox, and then click “OK”. As shown below. After canceling “Quick projection”, in the projector list, “Bind Projector” in the right-click menu will be gray, and then you can not bind the designated projector. 8.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) If there is more than one wireless network card in your computer, you may perform wireless projection while Internet surfing. TDW 680 allows user to select one of the wireless NICs to project. You may select the NIC to project by clicking the drop-down menu, as shown below: After the configuration, put the mouse point over the “Lenovo Wireless Projector” tray icon, and you may see the below information of the selected NIC. 9.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) The projector parameter can be set by opening the controller panel at the computer side during projecting. Right click “Lenovo Wireless Projector” tray icon, select “Controller” to open the controller panel, as show above, which functions are the same with the remote control. Function keys of controller: 1- Menu: Open the projector OSD menu and back to the previous menu level. 2- Back: Back to previous menu level.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Projector has build-in USB interface, which can dependently play the pictures stored in flash disk without computer. Right click the “Lenovo Wireless Projector” icon in the tray, select “USB play” to bring up the USB play interface at the projector side, you can play the pictures stored in flash disk of the projector. Note: you may also bring up the USB play interface by the projector menu to use the USB play functions.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Select “Yes” to end the project, and “No” to abort this task. 4. Right click “Lenovo Wireless Projector” icon in the tray to select “End project”, directly exit “Lenovo Wireless Projector” program. 5. Press “Wireless” button on the remote control of projector to forcibly end the projection.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) IV. DESCRIPTION OF USB DISPLAY Main Functions “USB Play” can read and show static image files stored in USB mobile storage device (including USB flash disk, USB mobile hard disk, and digital camera with USB interface, and etc.), which can auto-scale, auto-play and full screen show the pictures. “USB Play” can support 5 image file formats (JPG, BMP, GIF, PCX and PNG, except the animate feature of GIF89a) and 1 image index file format (.IDX).
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Main Interface 3. Open File Use the simulative mouse function of remote control to click “Open File” button. The window as shown below will appear, in which lists all the file names and file directories that can be played in USB storage device. Select the file to be played from the listed file names, then click “Confirm” button to start playing. Note 1: If the selected file is index file (it is a plain text file with .
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) Note 2: If the flash disk is set to FD mode, and there is no response when you click “Open File”, please set the flash disk to HD mode. 4. Auto Page/Manual Page The “Auto Page/Manual Page” button is a diplex one. After opening file, this file is on Manual Page status, and this button displays as “Auto Page”. After click “Auto Page”, the system will be on auto page status, then the button displays as “Manual Page”.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) The function of “End Play” button is to end the playing of USB pictures and restore the projector to “Ready” status. When USB playing, the working status of projector will be on “USB Play” at the connected computer side, and after ending USB play, the working status of projector will be automatically changed to “Ready” status to wait for the next wireless project.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) V. FAQ What’s the ID number of the projector? Each projector is assigned an ID number as the unique identification mark in the factory, which is the “name” of the projector. This ID number will be shown on the left bottom of the screen after the TDW680 projector is turn on.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) You maybe use a pirate copy of OFFICE software, please close this PPT file, and then open the file and play again. Please use the official OFFICE. How to play videos, for example DVD? Please select the wired mode to play videos. How to project the wireless network content by using the wireless mode? If you use Windows XP OS, please connect to Internet first, and then perform the projection.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) The plugged USB device is not supported. Please try with other type of USB device such as a flash disk of Lenovo or Netac. Why aren’t the files stored in the flash disk displayed? There are no files in this flash disk, or the picture file format stored in this flash disk is not supported. Please convert the pictures into the format that is supported.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) How to create an index file? The index file is a plain text file with the suffix name as .idx. The content of the index file is a sequence of the files to be played. There should be no space in the file names. The index file and the picture files should be in the same directory. As shown in the screenshot below, the index file “幻灯 片 _GIF.idx” and the picture files are in the same directory called “GIF”.
TTD DW W668800 M Maannuuaall((W Wiirreelleessss ppoorrttiioonn)) RS32 PIN ASSIGNMENT (PS2 PORT) FCC RF Radiation Exposure Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
