Specifications

Application Note
Using Verizon IP Trunk Services with the HiPath 3000 V9 system
Page 46 of 55
After entering the dial plan information select an unused Route table to define the trunk route group and
out dial rule. In the example, Route Table 3 has been selected.
In the lower portion of the form select Route Table 3 from the Route Table list box
In selection 1 > Route of Route Table 3 enter the name of Route Table defined in step 11.2.3. In the
example below the name assigned is Verizon.
In selection 1 > Dial Rule, enter the name of the out dial rule. In the example below the Dial Rule name is
Dial SIP.